In this tutorial you will learn Tutorial how to make Crankshaft. This is on categories advanced tutorial. You can learn tutorial step by step and more easly. so let us start.
-
Step 1
open a sketch on the right plane and draw a sketch like shown
-
Step 2
open a sketch on the body. draw a 30mm radiused circle and extrude it 20mm
-
Step 3
use revolve command
-
Step 4
go to other side draw shown sketch and extrude it 20 mm
-
Step 5
open a sketch on same surface and draw shown skecth
-
Step 6
use cut extrude command and tick 'filp side to cut'
-
Step 7
now use mirror command. your crank began to take shape
-
Step 8
use move copy body command. enter volues
-
Step 9
rotate this (4th from right side) body 60degree
-
Step 10
rotate 3th body 120 degree
-
Step 11
rotate sixth body 180 degree
-
Step 12
rotate second body 240 degree
-
Step 13
rotate 5th body 300 degree
-
Step 14
use combine command. your crank is ready for now. we will add oil canal and other parts after
No comments:
Post a Comment