Modeling a spring in AutoCAD using slice tool: Advanced Tutorial

Tutorial on modeling spring using slice tool in AutoCAD. In this tutorial, you will learn How to Modeling a spring in AutoCAD using slice tool in Autocad. This is on categories advanced tutorial. You can learn tutorial step by step and more easly. so let us start.

1. Step 1

   Start AutoCAD and input Torus command.
   
   

2. Step 2

   Center at 0,0, Radius of torus = 25, and tube is 2.5.
   
   

3. Step 3

   Now we have the torus generated.
   
   

4. Step 4

   Slice command and select the torus.
   
   

5. Step 5

   Enter ZX plane.
   
   

6. Step 6

   Enter point 0,0,0.
   
   

7. Step 7

   B for both sides.
   
   

8. Step 8

   Now enter rotate3d command & select the half of the torus.
   
   

9. Step 9

   Select Y-axis.
   
   

10. Step 10

    Ctrl+right click and then select center.
    
    

11. Step 11

    Select the center of the torus.
    
    

12. Step 12

    Enter 5º angle.
    
    

13. Step 13

    Repeat same step for other half but the angle is -5º.
    
    

14. Step 14

    Copy command and select both objects.
    
    

15. Step 15

    Multiple type.
    
    

16. Step 16

    Select the lower point as the base point and the upper point as targer point. Keep repeating it till you get desired spring.
    
    

17. Step 17

    We have the spring.
    
     
    
    Now the tutorial Modeling a spring in AutoCAD using slice tool in Autocad has been finished. If you need any tutorial to improve your skill in autocad please visit other tutorial on this blog. Ok thanks for coming.
    
    By: Sudhir Gill